majic tractor paint not drying
majic tractor paint not drying
While it is well recommended for durability, sometimes just two coats will suffice for clear coat. In some cases it was hit or miss as some posters indicated using the same mix with success. "publisher": { and unless you really scuff it the paint does scratch off as it does not adhere. I finished painting a Ford lift disk and the temperature was colder than I like. The repair shops use quarts and gallons of product on a regular basis, where the home hobbyist who uses the spray cans isn't that much of his business. I don't know of anyone else in the business in this area that uses spray bombs, so I'm speaking of this general area. }, I finished painting a Ford lift disk and the temperature was colder than I like. Okay so we are in the final stages of fiberglassing/filler/sanding our 1971. When the object dries, keep it running with the fan so that more paint will evaporates. a few have hason.. some have IH paint. I got some real primer with activator. A thin coat can crease once more. Also this was not over primer. I'm not plumb dumb when it comes to painting. Hardener can be added to a o Acrylic Paint? Better than rolling it with indoor latex paint like you see done on some city vans. You are using an out of date browser. I have painted stuff that was fingerprint safe in 30m, { I hate when companies try to be sneaky like that, seems like they are trying to scam you. Is that what you're talking about? Ive had the best luck using the primer gun w/ 1.8 tip. What Does An RV Propane Gas Leak Smell Like? Thanks for the input guys, if I had unlimited funds I would go with Bob & Ians suggestions with a faster drying auto or marine paint, but since we are over budget already I am gonna give the Majic tractor primer & paint a try using a Campbell Hausfeld paint sprayer with at least 2 coats of primer & paint each and maybe a clear over coat. "interactionStatistic": { it was pretty warm when i did the first coat, after a couple coats of primer that sat for 2 days. This is combined with an equally strong interest in contemporary art from the Asian diasporas, alongside the issues of identity, transmigration and global relations. Also this was not over primer. I guess at this point the question is do I sandblasWhat paintt the paint and primer off or give this paint another week or two to adhere. Afterwards, apply 1 cup of Solvent on a paint object, let sit for at least 6 hours then wipe off the edges. I've always have used ppg epoxy primer and John Deere industrial black on stuff I want to last. The spray cans aren't used in a collision repair setting as these shops don't make money on rework. Guess it's the old you get what you pay for, so I guess it's back to Plasticote. TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. Ok, I spoke to yet another painter this evening from a third shop, and he did indicate that they use the non-catalyzed version of high build in a spray bomb. Rustoleum primer is an enamel primer that takes several days to dry completely. How To Keep Your Dog Cool While RVing This Summer. I saw a guy who painted his tractor with valspar from TSC lay his hand on top of the motor two weeks after it was painted. "@id": "https://www.yesterdaystractors.com/" http://www.majicpaints.com/wp-content/uploads/2013/08/Paint-Training_TSCWEB.pdf. But I just find it hard to believe a collision shop anywhere, that is a legitimate business and is working with Insurance companies, is using spray bomb paint for repairs. If you're going to use hardener you need a supplied air system. i'm going through the same type of thing with some house paint. The couple guys I spoke to this morning mix all their primers, and laughed at the idea of using the spray bombs in their shop environment. Kevin's first post indicated the Majik brand was bought at the TSC, so I don't think that's what his paint jobber was removing from the shelf. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'G-04SJ2KTSCK',{ cookie_flags: 'max-age=7200;secure;samesite=none' }); Welcome! "@type": "WebPage", Born in Singapore and based in New York City, Brittney maintains a deep interest in the contemporary art landscape of Southeast Asia. That paint is a soybean oil alkyd paint. IIRC the threads were discussing spraying steering wheels and I believe the rattle can product in most cases was the primer. even with the hot weather here, it still has that "not quite done drying" feel to it. Spray is the most reliable method of painting by mixing pint-sized Majic Reducer with one gallon of Majic Town and Country Tractor paint. Adding hardener and thin with Acetone was a winner for me. They mix automotive paint to whatever color your request, insert the appropriate amount of activator, and put it into a can. ? You don't want to breathe any of that. I too am having problems with Majik brand spray bombs. So with a slow drying primer combined with slow drying paint with no hardener it will take a long time to for both of them to dry completely. Spray on the next coat after you let each coat dry and then carefully pick up the next one. On your solid rivets, once set they tend to displace the hole outward, so you may want to insure the sizing isn't enlarged too much. I prefer a high build industrial primer as you have to sand it also but only to feather cut areas and to remove lint and overspray. and unless you really scuff it the paint does scratch off as it does not adhere. I'd never do another project without it. As far as recommending a paint, that would depend on if you could get the means of spraying the paint. I reduced it by 1/2 the amount suggested, trying to avoid runs. I have painted stuff that was fingerprint safe in 30m then he did somerthing wrong in prep or application. That sounds pretty normal for alkyd enamel with no hardener. It is possible that the paints finish can flake out without clear coating applied. Art Radaris the only editorially independent online news source writing about contemporary art across Asia. As far as recommending a paint, that would depend on if you could get the means of spraying the paint. Mike I think (as i had this problem) it was your self etching primer. Mix thoroughly. guess i'll let it go until it starts getting cold before i reinstall the W/S. "width": 200, Majic Clear Coat High Gloss Lacquer should not have any materials on the surface sprayed with the lacquer. You must log in or register to reply here. "logo": { Don't know if you noticed it or not, but the Majic brand spray paint, while in a std sized spray can, doesn't have as much paint in the can, think it's 9 oz compared to 12 oz. This applies to dry and recoats as well as air and relative humidity levels that are 70F (21C) and 50% relative to 50% respectively. You must log in or register to reply here. You don't want to breathe any of that. You could keep touching up the paint as it comes off or go ahead and take it off and start over. Reducers and hardeners on the Clear Coat cannot be applied. Use Rustoleum, Valspar, or Sherwin Williams brand. $200.00 for a good quality paint is normal. I can't speak to what brand it was, but have read threads on the HAMB and elsewhere of people using a mix of spray bombs and "automotive" paints out of a spray gun. I have tried everything even painting lighter coats but same results. I did not add hardener. But he did say the ONLY time it is used is when they have a small sand through to bare steel or filler. That's OK, I was just hoping that I could redirect the o.p. But he also cautioned that you don't want to approach using this product as if it were catalyzed high build. I sandblasted the metal, primed most pieces with rustoleum self etching primer, others with just rustoleum primer. How Long Does It Take For Majic Tractor Paint To Cure? When he leaned up against the tractor the paint just peeled back where his hand was at and that was in the summertime. In humid conditions, paints do not fully dry, or they will not come out as fine when the weather is unusually hot or cold. You should apply one coat of Clear Gloss Lacquer. I have heated my garage for the last week and still not dry. I have tried to use both together before they don't mix, if your going to use majic get majic primer. "datePublished": "2013-03-15", The John Deere dries so hard, which I like. Don't see how a spray can of clear will be as durable and UV resistant eitherThe companies that are marketing these ready-to-use spray paints are targeting those home hobbyists that do not have proper painting equipment. If so, given it's purpose (what it's holding together), it may be safer to go the next size up and resize the rivet head to match what's called for on this restoration project. You could keep touching up the paint as it comes off or go ahead and take it off and start over. But when you go to mixing non-catalyst products with catalyst products. with the TCS paint you do need the catalyst hardner, thats why their paint is $29.00 a gal. what paint does everyone recommend. This is on a old hay rake that I was planning on useing in a couple months. As a result of the hardener, the paint dried more quickly. Sorry to take your thread for a detour here Kevin, but readers should know that there are SOME spray bomb (aka: spray can) products currently being touted as industry applicable. It's easy to think primer is primer but a lot of times some paint won't adhere to some primers. Using water to reduce the paint for a sprayer is not a good idea. I used a catalyzed epoxy primer under it, and Majic M-F red as the color coat. }, I did not add hardener. The can is supposed to be good for 24 hours. Waste, you say? For a better experience, please enable JavaScript in your browser before proceeding. According to the brand you choose, please read the instructions carefully if you plan on adding activator or hardener to acrylic enamel paint. I originally thought it was a temperature issue so I tried painting some small parts inside. I just sprayed my tractor with Majic paint five days ago,and I can still easily scrape it off with my fingernail. When he leaned up against the tractor the paint just peeled back where his hand was at and that was in the summertime. Trailer: 1974 Boler 1300 - 2014 Escape 19', I am in agreement with Bob, time is money and the last thing I ever want to do is a job over again because a cheaper product failed. ? I just finished a wagon project with it. I too need to know what to do next. To follow up, I finally got the first coat of color on my bike frame. You get what you pay for. I did not add hardener. If you're going to use hardener you need a supplied air system. The paint has held up on the implements well and did take a little longer to dry than other bc/cc paints ive used, but oil based usaully does take longer. If I was going to paint a Tractor, I wouldn't care as the tractors of the world get dirty and beat up on a daily basis. One of the painters I spoke to is actually damn good about looking at a job and being able to mix up what it needs with only a couple ounces left over, whether that be primer, base, or clears, a spot repair or an overall. You guys are talking about "spray bombs" - when I hear that term, I think of the custom made pre-mixed paint cans you get at a good auto parts store. "interactionType": "https://schema.org/CommentAction", Hardener does not have to be applied to the coat of our tractors, but if it is added it can enhance the surfaces gloss, which makes the coating more durable and adheres to it. Never tried the Magic paint. I came out to the shop this morning, checked the vise, and the paint is soft as can be. the next day, open the door and it's bonded to the weather stripping and pulled loose from the door. You can wait a bit of time to recoat your paint if its a water-based product. Also tried just brush on from the can and that did not flow very well and left brush marks. The paint is adhered as well right now as it's going to get. a few have hason.. some have IH paint. total paint cost on my 600 was $672.86, Does the primer stick,if not your metal is to slick, your paint may not have any drier in it u got bad paint get anouther brand. I just sprayed my tractor with Majic paint five days ago,and I can still easily scrape it off with my fingernail. probably 18 of my 20+ tractors have valspar paint on them. If you want to paint with oil, wait 24 hours prior to application. The primer has been dryed sufficiently. So with a slow drying primer combined with slow drying paint with no hardener it will take a long time to for both of them to dry completely. http://www.u-pol.com/product-cat/118/clear%231%E2%84%A2-high-gloss-clear-coat.htm, http://www.repaintsupply.com/pd-clearcoat-uv-resistant.cfm, http://www.repaintsupply.com/pd_2_part_2k_aerosol.cfm. let the color coat dry about 14 hours with the door cracked open so it wouldn't touch the weather stripping. you can have a chemical reaction that will affect one or the other. }, I just sprayed my tractor with Majic paint five days ago,and I can still easily scrape it off with my fingernail. Just got back from the jobbers a little while ago. It's easy to think primer is primer but a lot of times some paint won't adhere to some primers. The spraying took some extra thinning with reducer than recommeded on the can but it did work. so i pulled all the W/S off, sanded and repainted. After doing this, place your hand on the surface. For a better experience, please enable JavaScript in your browser before proceeding. It's a decent discussion going on and that's what it's all about. I am told that this will produce very good results using this type of paint with a glass like finishfrom what I have read online everyone who followed the direction had great results and not just on tractorsI have seen a few fully restored vintage tractors & trucks that were done with this type of enamel paint (not sure of brand) with amazing results. with the TCS paint you do need the catalyst hardner, thats why their paint is $29.00 a gal. This is on a old hay rake that I was planning on useing in a couple months. When he leaned up against the tractor the paint just peeled back where his hand was at and that was in the summertime. I prefer a high build industrial primer as you have to sand it also but only to feather cut areas and to remove lint and overspray. If you are going to brush it I would use their industrial maintenance enamel. ", So from an economic feasibility standpoint for the repair shop, having a gallon of primer on the shelf that you could mix with appropriate thinners and hardeners to the quantity you need would be far cheaper than having an equivalent sprayable qty of those 2K style spray cans, and less waste in the long run. Which happens when all the solvents have evaporated. What I have called spray bombs or spray cans, has been in reference to pre-packaged non catalyzed product. I should have known better and like a said.lesson learned. "mainEntityOfPage": { FWIW, Majic replied to my questions with some detailed instructions, so I'm feeling more confident that I'll be able to get good results. probably 18 of my 20+ tractors have valspar paint on them. The reason that it is the least expensive paint you can buy, is because among other things, it has the cheapest solvents you can buy in it. Adding hardener and thin with Acetone was a winner for me. It is now time to spray two to three coats of Majic Paints Tractor, Truck, and Implement Enamel after the primer has dried. ", I painted some parts with a brush a week ago and I can still scrape the paint off with my fingernail. I would buy the primer and finish coat from the same auto paint store. The paint is adhered as well right now as it's going to get. If you are going to brush it I would use their industrial maintenance enamel. It has a lower viscosity, which is why its ready to be sprayed after its made. If it were me I would go ahead and use it like it is and at the end of the season sandblast it and do it over. Mike, I think (as i had this problem) it was your self etching primer. 5 days later it still scraped right off. A good way to dry acrylic enamel is by adding drying agents to it. I've never read much good about the newer TSC "Magic" paint, they used carried Valspar and that was good stuff. That sounds pretty normal for alkyd enamel with no hardener. glad they care, sounds like a good company.
Single Family Homes For Sale In Florida Under 200k, Small Vellum Envelopes, Jbl Reflect Flow Bluetooth Pairing, Civilian Hotel Restaurant, Black Metal Full Bed Frame, Welcome Sign For Front Door With Sunflower, Hard Plastic Name Badges, Original M65 Field Jacket For Sale, Salicylic Acid Pads For Acne,