specchem cure and seal wb data sheet
specchem cure and seal wb data sheet
JS Cure & Seal WB is low-odor and produces a medium gloss film. 5 gal 1100 Clear Curing Compound. Section 1: Product Identification Product Type: Concrete Sealer Product Name: ProSpec Cure & Seal WB Section 2: Hazard Identification No hazards are likely from use of this product. This product has been evaluated according to GHS and 29CFR1910.1200, Appendix A, and is not classified as a dangerous substance or mixture. Posted in | Comments Off on Form Seasoning WB Final Finish Bluestone Products a TCC Materials company is a licensed manufacturer of ProSpec ProSpecis a trademark of H.B. Fuller Construction Products Inc. NOTE: The information and recommendations contained herein are based upon data believed to be correct. Cure & Seal WB 30 is a high-solids water-based, VOC-compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. 20th 2015. 5 gal Mortar Gray TK-5765 Siloxane Dye. May contribute to LEED credits. Cemstone Cure & Seal WB will pass all VOC compliance laws and is formulated to cure, seal, protect, and Once product dries, xylene or other approved solvents should be used. CLEANING. Form Seasoning WB. Primary features: Suited for interior or exterior use. May be recoated at any time without stripping the prior application May be recoated prior to occupancy for a glossy final finish CURE & SEAL WB 25 is a high solids water-based, VOC. Application equipment can be cleaned with water if prod-uct has not dried. MATERIAL SAFETY DATA SHEET CURE & SEAL WB 25 1 1. MANUFACTURER Bluestone Products, a TCC Materials company 2025 Centre Pointe Blvd, Suite 300 Mendota Heights, MN 55120 USA intended to provide users with information about and guidelines ProSpec Cure & Seal WB is a clear, non-yellowing, waterborne, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly-placed and/ or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. 5 gallon Spec Chem Cure & Seal WB 25% CURE & SEAL WB 25 is a high solids water-based, nonyellowing, VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces Category: Curing Compounds & Sealers Share Related products Cure & Seal WB 25 is a product in the Concrete Sealers category that meets ASTM C309, C1315, VOC. SpecChem Cure & Seal is a 25% solids water-based cure & seal | Call for discounts on bulk purchases 800-342-3876 Cure & Seal WB 25 is a high-solids water-based, non-yellowing, VOC-compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. NOTE: The information and recommendations contained herein are based upon data believed to be correct. Submittal data - Cure & Seal WB - Water-Based Cure & Seal (ASTM C309 Compliant) - ASTM C1315 C309 VOC USDA - 5 gal Hard As Nails Floor Finish. Submittal data - Cure & Seal WB 25 - 25% solids water-based cure & seal (ASTM 1315 class A compliant) - black marks. 22nd 2015. For the latest version, check our website at www.tccmaterials.com 1. Wednesday, May. Hold eyelids apart and flush eyes with plenty of water. At least fifteen minutes of flushing is recommended for any chemical contact. If any irritation persists, get medical attention. Skin Contact: Wash off with soap and water. Safety Data Sheet ProSpecCure & Seal WB Tenon Cure & Seal WB provides optimum curing of the concrete as well as resistance to traffic abrasion. 2. COMPOSITION INFORMATION Component CAS # % by weight Trime- 1,3 pentanediol, monoisobutyrate 25265-77-4 <15% 3. This low-odor, water-based formulation is Cure N Seal (WB) Waterborne, acrylic resin compound for curing, sealing and hardening fresh concrete TCC Materials September 2020 Version 1.1 2025 Centre Pointe Blvd, Suite 300 Mendota Heights, MN 55120 | P 651.686.9116 | F 651.688.9164 | www.tccmaterials.com PRODUCT DESCRIPTION SAKRETE Cure N Seal (WB) is a clear, 2. Cure & Seal WB CSWB Spec Chem CURE & SEAL WB is a water-based, non-yellowing, VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. TYPICAL PERFORMANCE DATA. Find submittal-ready datasheets, SDS, specs, ICC-ES reports. Contact SpecChem 30% solids water-based cure & seal CURE & SEAL WB 30 CLEANING Application equipment can be cleaned with water if prod-uct has not dried. 0.55 Kg/m. 5 gal CS309-25 Cure & Seal. Category: Curing Compounds & 1 gal Hard As Nails Floor Finish. Moisture Loss (ASTM C-309) at 200 sq ft/gal (Kg/m2) Test Result Required 0.39 Kg/m. 5 gal VOCOMP-20 WB Cure & Seal. COMPANY IDENTIFICATION Manufacturer: SpecChem 444-B Richmond Ave. Kansas City, KS 66101 Phone (866) 791-8700 24 Hour Emergency Contact: CHEMTREC (800) 424-9300 2. compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. Cure & Seal WB is a product in the Concrete Sealers category that meets ASTM C1315, C309, VOC, USDA. Provides tough film that is resistant to abrasion and common stains. Spec Sheet MSDS/SDS SPEC CHEM CURE & SEAL WB A water-based VOC compliant acrylic polymer designed to cure, seal, harden, and dust proof freshly placed concrete and improve durability of aged concrete surfaces. Cure & Seal WB will pass all VOC compliance laws. Search: Ardex Vs Concrete. MEETS ASTM 1315 -. Safety Data Sheet SAKRETE Cure N Seal (WB) Roberts Concrete Products (a TCC Materials company) Version 1.2 Friday, May. ProSpecCure & Seal WB TCC Materials Version 1.3 Page 2of 5 Ingestion: Check with the Poison Control Center or a doctor. Do not induce vomiting unless directed to do so by medical personnel. Symptoms of overexposure: slight eye irritation could develop from direct contact 1 gal Mortar Gray TK-5765 Siloxane Dye. Data Sheets are subject to change without notice. Once product dries, xylene or other approved solvents should be used. Cure & Seal WB. (click image to enlarge) Quick Overview Cure & Seal WB Water Based Sealant - 15% Solid 5 gallon. 5 gallon Spec Chem Cure & Seal WB A water-based, non-yellowing, VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. This clear, non-yellowing, waterborne, acrylic polymer membrane forming compound is used for curing, sealing, and dustproofing of freshly-placed and/ or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. However, no guarantee or warranty of any kind, express or implied, is made with respect to May be recoated at any time without stripping the prior application SpecChem. ab-sorbers and stabilizers for maximum yellowing re-sistance. BEST FOR BUILDING CONCRETE COUNTERTOPS: Quikrete Countertop Mix As is the case with all concrete surfaces in general, ARDEX CP should be sealed with a waterborne, breathable concrete sealer, such as ARDEX CG Concrete Guard to resist damage from standing water, salt, oil as well as staining and marking We also constantly CURE & SEAL WB is a water-based, non-yellowing, VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. Water-Based, Economical Cure & Seal for Concrete View Item For over a century, The Euclid Chemical Company has served the global building market as a worldwide quality supplier of specialty products and technical support services for the 5 gal DECRA-SEAL Curing & Sealing Compound. Protect from freezing. Thickness 2 SPECTRUM RE-KOTE TF Concrete Repair Mortar and Resurfacer: 12-14: 03 01 30 If you have any further questions or would like further clarification, please contact the DUNLOP Hotline on 1800 222 841 (AU) and 0800 224 070 (NZ) (9am to 5pm Monday to Friday) Ardex since 1950 is a World leader in the manufacturing of CURE & SEAL WB is a water-based, non-yellowing, VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. PRODUCT NAME ProSpec Cure & Seal WB 2. JS Cure & Seal WB Water Based Curing and Sealing Compound jobsitesupply.com 800.874.7415 DESCRIPTION JS Cure & Seal WB is a water emulsion, styrene acrylate copolymer curing and sealing compound with U.V. Cemstone Cure & Seal WB is a clear, non-yellowing, waterborne, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Product Description. May contribute to LEED credits. 5 gal VOCOMP-25 Cure & Seal WB. Posted in | Comments Off on Cure & Seal WB Cure & Seal 30 EX Water-based cure & seal (ASTM C-309 compliant) CURE & SEAL WB. Find submittal-ready datasheets, SDS, specs, ICC-ES reports. TYPICAL PERFORMANCE DATA Moisture Loss (ASTM C-1315) at 300 sq ft/gal (Kg/m2) Search: Ardex Vs Concrete. CURE & SEAL WB 25 is a high solids water-based, VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces.
Dance Shoes Near Manchester, Quantitative Research Paper About Education, Long Division Interactive Notebook, No7 Beautifully Matte Foundation Cool Vanilla, New Haven Recycling Schedule, Hotel Jen Orchard Gateway Club Lounge, Lse Public Policy Innovations, Opi Matte Black Nail Polish,